![]() Repaired using 'zpool clear' may allow some data to be recovered. There are insufficient replicas for the pool toĪction: Destroy and re-create the pool from a backup source. Status: One or more devices are faulted in response to persistent errors. Somehow after disable autoimport by setting zfs_autoimport_disable=0 in /etc/modprobe.d/zfs.conf, zpool status works $ sudo zpool status Is there any chance that I can force the import and try to fix the data? Hopefully raidz3 can restore the damaged data? Thank you all!!! sudo zpool import -d /dev/disk/by-id/ content-poolĪll returned: cannot import content-pool': one or more devices is currently unavailableĪlso tried to use zdb -l to dump vdev labels from the partitions of alive hard drive, seems the label can be retrieved successfully, the output are almost the same, except the guid: part, and there are 36 children(0-35) just like to original working raidz3 pool:.normally zfs-import-cache is activated (was the reason my guess about the cachefile). Tried to import it using following trying, also tried with -F/ -f/ -m/ -o readonly=on parameter: you can check your ZFS pool import services: systemctl grep zfs-import you should see two services: zfs-import and zfs-import-cache. I've confirmed that all the disks are detected by the system properly, can be located in /dev/disk/by/-id/ / /dev/ Also, this is not an emergency hotline, if you need professional help in a hurry, consider a professional service. The pool tanker is a ZFS mirror that is supported by two 8TB WD. In my case, the failure shows up like this. This should show you if the automatic import succeeded or not. systemctl status rvice and systemctl status rvice. Once you have started your system and don’t see any ZFS pools available, try running systemctl status rvice or journalctl -u rvice. ![]() Status: One or more devices were being resilvered.Īction: The pool cannot be imported due to damaged devices or data. Please provide some output from the relevant logs and services, e.g. Tried to list the pool, but it says: The pool cannot be imported due to damaged devices or data. I have a raidz3 zpool on Ubuntu 18.04 with the Ubuntu built-in zfs features, there was a system crash recently, I guess it's caused by an unavailable(failed) disk, and after rebooting, the pool was missing: $ sudo zpool status ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |